Tech Cool 35075 (Zimmer) is designed to be extremely low foaming in individual sumps. This product can be mixed directly with water and is suitable for tapping, reaming, sawing, turning, ID and OD grinding or similar operations. Recommended concentration of Tech Cool 35075 (Zimmer) range from 40:1 to 10:1 depending on application and metallurgy type.

Tech Cool 35075 (Zimmer) is monitored by titration and refractometer

Refractometer Factor – 1.0

Consult your Chemetall Representative for the equipment and reagents required.

The Chemetall Refractometer can be used to measure the refractive index (Brix) of this product/solution.

Water driven proportioners can be used to automatically feed the premixed solution of this product to the

sumps. The Coolant Filter System can be used to filter out sludge and oils from the metalworking fluids.

Please contact the Chemetall Process Equipment and Engineering Department for specific

recommendations.

NOTES ON USE (see Material Safety Data Sheet)

Prior to handling and use of any of the materials referenced in this document, the Material Safety Data Sheets should be read and understood by all personnel in contact with these materials.

STORAGE

Tech Cool 35075 (Zimmer) can be stored either indoors or outdoors. If outdoor storage is used, the product should be brought to room temperature prior to use.

Dry indoor storage at temperatures between 40oF and 100oF (4.4oC and 37.8oC) is recommended, away from any incompatible materials referenced in the Material Safety Data Sheets. All containers should be tightly closed when not in use.

Any disposal of the materials referenced in this document should be in accordance with all applicable federal, state, providential and local regulations. The process solution can contain components other than those present in the materials as supplied. Analysis of process solutions may be required prior to disposal.

Chemetall US, Inc. (“Chemetall”) warrants that this product or products described herein will conform with its published specifications. The products supplied by Chemetall and information related to them are intended for use by buyers having necessary industrial skill and knowledge. Buyers should undertake sufficient verification and testing to determine the suitability of the Chemetall materials for their own purpose. Since buyer’s conditions of use of products are beyond Chemetall’s control, Chemetall does not warrant any recommendations and information for the use of such products. CHEMETALL bDISCLAIMS ALL OTHER WARRANTIES INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE IN CONNECTION WITH THE USE OF ITS PRODUCTS.